ZBRA00 Black and White Zebra Siser Glitter HTV Sheet
One 12in x 14.5in Sheet which is printed on Siser SparklePrint ( Glitter HTV )
All sheets have a +/- 1/4in cut tolerance on the width and length.
Carrier sheet is not applied and must be purchased separately here.
Sheets may have additonal white space on one end beyond the printed area. The printed area will still be 12in x 14.5in +/- the stated tolerance above
Application instructions are below in the full description.
|1-14 items||$6.99 / each|
|15 or more items||$5.99 / each||save 14.31%|
PU composition • Polyester Backing • Smooth Glitter Finish • 190 Microns / 7.48 Mils • TOP LAYER ONLY.
• 100% cotton • Poly/cotton blends • 100% polyester
• Cut material print side up. DO NOT MIRROR.
• Weed excess material.
• Apply TTD Mask Carrier sheet, sold separately.
• Remove plastic backing from entire design.
• Apply design at 311°F/155°C with medium/firm pressure for 15 seconds
• Peel hot
• Wait 24 hours before 1st wash • Machine wash cold
• Dry on tumble / low heat dryer setting • Do not dry clean or bleach