Siser EasyWeed Fluorescent Ring

You will earn up to 2 reward points after purchasing this product.

A custom made sample ring of all 10 colors of Siser EasyWeed Fluorescent and Glow in the Dark heat transfer vinyl (updated 8/10/21)

  • $2.99
Qty:  
OR

EasyWeed® Heat Transfer Vinyl

The most trusted heat transfer vinyl brand in the world

Why is EasyWeed our number one selling heat transfer vinyl? Simple, the EasyWeed Advantage! EasyWeed applies at a lower temperature than competitor material, backing can be peeled hot or cold and doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed is thinner than others on the market and offers a one-second tack application that's great for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. EasyWeed can be cut with laser systems.

EasyWeed is 90 Microns / 3.5 Mils and is a PU composition.

EasyWeed Applies To:


Cricut:   Blade: Standard   Setting: Iron-on

Silhouette Cameo:   Blade: Standard, 2   Material: Heat Transfer, Smooth   Speed: 8   Force: 4

Brother ScanNCut:   Blade: Standard, 2   Cut Speed: 1   Cut Pressure: 4

Roland GX/GS-24:   Blade: 45°   Gram Force: 80-90   Offset: .250   Speed: 25-50 cm/s

Graphtec:   Blade: 45°   Force: 8-9   Tool: CB09+0   Speed: 30 cm/s

MH, SC2, LP3, and Titan1:   Blade: 45°/60°   Gram Force: 80-85   Speed: 300 mm/s    *Blade Advancing Varies

Titan 2 & 3:    Blade: 45°/60°    Gram Force: 80-85   Speed: 300 mm/s   *Blade Advancing Varies


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Click here for a printable version of all HTV application instructions.

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Laundering:

• Wait 24 hours before first wash
• Machine wash warm or cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean

Applies to:


100% cotton
Poly/cotton blends
100% polyester
Leather

    • Product Size
      Ring
    • Weight
      2 oz
    • SKU
      FLUO-RING-ALL
  • Color Options
    Full Ring (10 Colors), EW016 Fluorescent Yellow, EW017 Fluorescent Orange, EW018 Fluorescent Green, EW019 Fluorescent Pink, EW020 Fluorescent Blue, EW030 Fluorescent Raspberry, EW081 Glow In The Dark (Added 7/14/15), EW084 Fluorescent Coral (Added 3/14/15), EW100 Fluorescent Berry (Added 7/21/17), EW118 Fluorescent Purple (Renumbered 8/10/21 Added 6/13/17)