ST87 Coral Stretch Sheet
One 12in x 14.75in sheet of Siser EasyWeed Stretch in Color ST87 Coral.
Only 100% genuine Siser HTV is used. All sheets are +/- 0.25in
EasyWeed® Stretch Heat Transfer Vinyl
Flexible Style for Performance Wear and More!
Performance wear has met its match! EasyWeed Stretch by Siser delivers all the benefits of our EasyWeed heat transfer material and combines it with super stretchability to create one remarkable heat transfer material! The thinnest of any Siser material, EasyWeed Stretch has an ultra-matte finish and a soft hand that’s available in 20 popular colors, including sweet mint and coral. While EasyWeed Stretch is ideal for performance apparel, the soft hand and light weight often make it a favorite for other garment decorating.
EasyWeed Stretch is CPSIA Certified, so it’s safe on garments for all ages!
Specifications: PU Composition • Pressure sensitive backing • Ultra-matte finish • 85 Microns/3.5 Mils • 45°/60° blade • Can be layered
Cricut®:Blade: Standard Setting: Iron-On | Silhouette Cameo:Blade: Standard, 3 Setting: Heat Transfer Material (Smooth) Speed: 8 Thickness: 6 | Scan N Cut:Blade: 2 Cut Speed: 1 Cut Pressure: 1 | Roland GS/GX-24:Blade: 45° Gram Force: 60-70 Offset: .250 Speed: 30 cm/s | Graphtec:Blade: 45° Gram Force: 9-10 Tool: CB09U+0 Speed: 30 cm/s |
Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold | Application Instructions (heat press) • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 320°F/160°C • Use medium/firm pressure for 20 seconds • Peel carrier hot or cold |