FP09 Pink StripFlock Pro Roll
One 12in x 59in Roll of Siser StripFlock Pro in Color FP09 Pink.
Only 100% genuine Siser HTV is used. All rolls are +/- 0.25in on the width and +/- 1in on the length.
StripFlock® Pro Heat Transfer Vinyl
The Only Flock in the Industry that can be Layered On Itself.
A great alternative to embroidery, StripFlock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep, opaque colors make StripFlock Pro excellent for retro designs or anytime you want a rich look. StripFlock Pro looks excellent on caps, bags, and garments that need textured visual interest. Use Stripflock Pro as a base layer and cover with other materials or more StripFlock Pro! The ability to layer this material allows you to say “yes” to multi-color designs.
Specifications: PVC Composition • Pressure sensitive backing • Suede-like finish • 500 Microns/19.6 Mils • 45°/60° blade • Can be layered
| Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier warm/cold | Application Instructions (heat press) • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 311°F/155°C • Use medium pressure for 15-20 seconds • Peel carrier warm/cold |
| StripFlock Pro Applies to:100% cotton Poly/cotton blends 100% polyester Leather | Laundering:Wait 24 hours before 1st wash Machine wash warm or cold / mild detergent Dry on normal dryer setting Do not dry clean |
Cricut: Blade: Standard | Silhouette Cameo: Blade: Standard, 4 | Scan N Cut: Blade: Standard, 4 |
Roland GS/GX-24: Blade: 45° | Graphtec: Blade: 45° | Titan Series: Blade: 45°/60° |