EW020 Fluorescent Blue EasyWeed Sheet

You will earn up to 3 reward points after purchasing this product.

One 12in x 14.75in sheet of Color EW020 Fluorescent Blue.

All sheets have a +/- 1/4in cut tolerance on the width and length..  Do note that sheets may sometimes have very small edge blemishes from the factory.  We do our best to cut around any that are larger ones that would exceed the cut tolerance.

Only 100% genuine Siser EasyWeed Heat Transfer Vinyl ( HTV ) is used. 

Previously EW20 Fluorescent Blue / 5020 Fluorescent Blue

The price per item goes down as you purchase more of this color. Note that this discount is per color and not based on the total quantity purchased. THIS DISCOUNT DOES NOT APPLY WHEN THE ITEM IS ON SALE OR CLEARANCE.:
1-14 items $3.75 / each  
15-29 items $2.77 / each save 26.13%
30-74 items $2.70 / each save 28%
75-149 items $2.60 / each save 30.67%
150 or more items $2.55 / each save 32%
  • $3.75

Qty:  
In stock (527 items available)
OR
This product is a part of the following bundle(s):

EasyWeed® Heat Transfer Vinyl

The most trusted heat transfer vinyl brand in the world

Why is EasyWeed our number one selling heat transfer vinyl? Simple, the EasyWeed Advantage! EasyWeed applies at a lower temperature than competitor material, backing can be peeled hot or cold and doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed is thinner than others on the market and offers a one-second tack application that's great for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. EasyWeed can be cut with laser systems.

EasyWeed is 90 Microns / 3.5 Mils and is a PU composition.

EasyWeed Applies To:


Cricut:   Blade: Standard   Setting: Iron-on

Silhouette Cameo:   Blade: Standard, 2   Material: Heat Transfer, Smooth   Speed: 8   Force: 4

Brother ScanNCut:   Blade: Standard, 2   Cut Speed: 1   Cut Pressure: 4

Roland GX/GS-24:   Blade: 45°   Gram Force: 80-90   Offset: .250   Speed: 25-50 cm/s

Graphtec:   Blade: 45°   Force: 8-9   Tool: CB09+0   Speed: 30 cm/s

MH, SC2, LP3, and Titan1:   Blade: 45°/60°   Gram Force: 80-85   Speed: 300 mm/s    *Blade Advancing Varies

Titan 2 & 3:    Blade: 45°/60°    Gram Force: 80-85   Speed: 300 mm/s   *Blade Advancing Varies


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Click here for a printable version of all HTV application instructions.

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Laundering:

• Wait 24 hours before first wash
• Machine wash warm or cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean

Applies to:


100% cotton
Poly/cotton blends
100% polyester
Leather

    • Product Size
      12in x 14.75in
    • Weight
      1.1 oz
    • SKU
      EW020-12x14.75