10in x 30ft Roll Ends
THESE ROLL ENDS ARE A SCRAP PRODUCT THAT MAY CONTAIN SOME FLAWED EDGES AND ARE NOT RETURNABLE OR REFUNDABLE DUE TO FLAWS.
Multiple of a product MAY be shipped as one larger roll up to a max of 5 (150ft total) but this is not guaranteed, it depends on stock levels of cut and uncut material.
There is a 1/2 inch tolerance on the width and 6 inch tolerance on the length.
We do not have the ability to plan for if/when these will be available. Please do not email us asking, we will not have an answer for you. These are a scrap product and only produced as necessary, not by request.
EasyWeed Stretch is a very thin, very flexible film, and with this said it is very particular about its pressing settings, including temp, time and most importantly pressure. With this said, there have been some people having difficulty over the past couple of months with EasyWeed Stretch not staying adhered as well as it has in the past. We have talked to Siser about this a few times and also done some testing on our own and have come up with a solution that should help. We are now recommending EasyWeed Stretch to be applied at 320 degrees for 20 seconds (instead of 305 for 15 seconds). This bit of additional temp and time seems to make the difference in getting a quality result from the product and should lessen your issues with it.
As always if you have trouble working with any product please do not hesitate to reach out to us (email works best) or Siser themselves. We are an authorized distributor and because of that when you purchase from TVS you gain both the support of TVS and of Siser NA.
NEW POLICY EFFECTIVE 4/13/18: If you order three or more of the 30ft or larger rolls from any category, we may use smaller sized cores at our discretion to help reduce package size. This allows us to fit more into standard box sizes and reduces the chance of excess shipping not covered by our Free Shipping option per the Shipping Policy If you would prefer the rolls to stay on the factory sized 3 inch cores, please let us know in your notes on the checkout page. Please note that this will make it more likely that excess shipping will need to be invoiced. Smaller cores are not available to be requested at this time as we have to convert them by hand.