MA15 Purple Matte Sheet
One 12in x 14.75in sheet of Siser EasyWeed Matte Color MA15 Purple.
All sheets have a +/- 1/4in cut tolerance. Do note that sheets may sometimes have very small edge blemishes from the factory. We do our best to cut around any that are larger ones that would exceed the cut tolerance.
|1-4 items||$3.50 / each|
|5-9 items||$3.25 / each||save 7%|
|10-14 items||$2.99 / each||save 15%|
|15-29 items||$2.65 / each||save 24%|
|30-74 items||$2.48 / each||save 29%|
|75-149 items||$2.28 / each||save 35%|
|150 or more items||$2.18 / each||save 38%|
EasyWeed® Heat Transfer Vinyl
The most trusted heat transfer vinyl brand in the world
Why is EasyWeed our number one selling heat transfer vinyl? Simple, the EasyWeed Advantage! EasyWeed applies at a lower temperature than competitor material, backing can be peeled hot or cold and doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed is thinner than others on the market and offers a one-second tack application that's great for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. EasyWeed can be cut with laser systems.
EasyWeed is 90 Microns / 3.5 Mils and is a PU composition.
Specifications: PU Composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered
|Cricut: Blade: Standard Setting: Iron-on|
|Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4|
|Brother ScanNCut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 4|
|Roland GX/GS-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s|
|Graphtec: Blade: 45° Force: 8-9 Tool: CB09+0 Speed: 30 cm/s|
|MH, SC2, LP3, and Titan1: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies|
|Titan 2 & 3: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies|
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
|Application instructions (home iron)|
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
|Application Instructions (heat press)|
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
|EasyWeed Applies to:|
Wait 24 hours before 1st wash