Siser EasyWeed Fluorescent Ring
A custom made sample ring of all 10 colors of Siser EasyWeed Fluorescent and Glow in the Dark heat transfer vinyl (updated 8/10/21)
All Color RINGS are made here at The Vinyl Spectrum by hand and are labelled on the back-side of the samples with the COLOR CODE, NAME, BRAND and SERIES. Some of them include exclusive colors that the guides and fans do not, such as the Siser EasyWeed Ring.
EasyWeed® Heat Transfer Vinyl
The most trusted heat transfer vinyl brand in the world
Why is EasyWeed our number one selling heat transfer vinyl? Simple, the EasyWeed Advantage! EasyWeed applies at a lower temperature than competitor material, backing can be peeled hot or cold and doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed is thinner than others on the market and offers a one-second tack application that's great for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. EasyWeed can be cut with laser systems.
EasyWeed is 90 Microns / 3.5 Mils and is a PU composition.
EasyWeed Applies To:
 | Cricut: Blade: Standard Setting: Iron-on |
 | Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 |
 | Brother ScanNCut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 4 |
 | Roland GX/GS-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s |
 | Graphtec: Blade: 45° Force: 8-9 Tool: CB09+0 Speed: 30 cm/s |
 | MH, SC2, LP3, and Titan1: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |
 | Titan 2 & 3: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Click here for a printable version of all HTV application instructions.
| Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover with Heat Transfer Cover Sheet or Multipurpose Paper • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold | Application Instructions (heat press) • Cover with Heat Transfer Cover Sheet or Multipurpose Paper • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold |
Laundering: • Wait 24 hours before first wash | Applies to: 100% cotton |
-
Color OptionsFull Ring (10 Colors), EW016 Fluorescent Yellow, EW017 Fluorescent Orange, EW018 Fluorescent Green, EW019 Fluorescent Pink, EW020 Fluorescent Blue, EW030 Fluorescent Raspberry, EW081 Glow In The Dark (Added 7/14/15), EW084 Fluorescent Coral (Added 3/14/15), EW100 Fluorescent Berry (Added 7/21/17), EW118 Fluorescent Purple (Renumbered 8/10/21 Added 6/13/17)