For use in brilliant and colourful displays. The film has long-term protection against UV-rays and mechanical stress when combined with ORAGUARD® laminating films. For indoor applications, when using dye-inks, lamination is required. For outdoor applications with direct contact to water, sealing of the edges is recommended. 

After printing, the ink must be allowed to thoroughly dry, in order to avoid any issues when later combined with the laminate. Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure. The compatibility of the selected lacquers and paints should be tested by the user, prior to the application of the material. Furthermore the application information published by ORAFOL must be considered. 

Instructions for use are just like any other adhesive vinyl, however you will want to add the laminate layer if the vinyl will be touched or exposed to water. Find the OraGuard laminate here in sheets and rolls.