X046 Pink Fluorescent 6510 Roll
One 12in x 30ft roll of color X046 Fluorescent Pink 6510 Fluorescent Gloss vinyl.
Only 100% genuine Oracal vinyl is used. All rolls are +/- 0.25in on the width and 1in on the length. Multiple of this product MAY be shipped as one larger roll up to a max of 150ft total but this is not guaranteed, it depends on stock levels of cut and uncut material.
Cast PVC film with high visibility when illuminated in all daylight conditions. Especially effective at twilight and in low visibility.
Silicone coated paper on one side
Solvent polyacrylate, permanent
Area of Use
Designed for vehicle and bus advertising, name plates and graphics of all types, which require special high impact visibility. Indoor exposure is almost unlimited. Due to its special release characteristics, this product is ideal for use in die-cut and computer-cut systems.
Thickness (without liner and adhesive) 110 Micron
Dimensional Stability (FINAT TM-14) Adhered to steel, no measurable shrinkage in cross direction; In length, 0,3 mm max.
Temperature Resistance Adhered to aluminum, -40°C to +105°C, no variation
Seawater resistance (DIN 50021) Adhered to aluminium, after 100h/23° C no variation Adhesive power* (FINAT TM 1, after 24h, stainless steel) 16 N/25 mm
Tensile strength (DIN EN ISO 527) Along: min. 13 MPa Across: min. 13 MPa Elongation at break (DIN EN ISO 527) Along: min. 100% Across: min. 100%
Shelf life** 2 years Application temperature Min. +8° C Service life by specialist application Under vertical outdoor exposure (normal climate of Central Europe) All colors: 1 year Fluorescent yellow: 2 years
Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any other contamination that could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Furthermore, the application information published by ORAFOL must be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number.