Neenah Inkjet Printable HTV Combo Pack
One pack of the following 20 sheets.
(10) 8.5in x 11in sheets of JET-PRO®SS.
(10) 8.5in x 11in sheet of 3G JET OPAQUE®.
PLEASE READ ENTIRE DESCRIPTION BEFORE PURCHASE OR USE. Product will be loosely rolled.
Neenah JET PRO® SS Heat Transfer Paper is printable by most desktop inkjet printers and is very easy to use, providing a soft, supple transferred image on white and light colored fabrics that is vibrant and durable – and will withstand many laundry cycles.
Neenah 3G JET OPAQUE® Heat Transfer Paper is printable by most desktop and roll fed inkjet printers and is easy to use for transferring inkjet photo-quality images or other graphics to dark colored materials, offering a soft, supple transferred image that is vibrant and durable – and will withstand many laundry cycles.
**The Vinyl Spectrum does not support using this product, but we are providing it at the request of many customers. We cannot guarantee it will work for you, and are not responsible for replacing either product or garments, etc. **
JET PRO SS PRINTING INSTRUCTIONS:
1. Print the image in reverse/mirrored format.
2. Trim away the unprinted areas of the transfer if desired.
PRE-TRANSFERRING INSTRUCTIONS:
1. Prepare the garment/fabric by ensuring the surface is clean, dry, and wrinkle free by using a lint brush and your heat press.
TRANSFERRING INSTRUCTIONS:
1. Place the transfer on top of the garment with the image side touching the substrate (backing paper is facing you).
2. Press 30 seconds at 375°F/190°C using medium/heavy pressure (30 psi/3 to 5 bar).
3. Let paper cool up to 1 minute to avoid burning fingers.
4. Peel the paper while still hot in a smooth even motion.
5. For greatest softness, quickly stretch the fabric in all directions while still hot.
WASHING INSTRUCTIONS: Turn garment inside out and wash in cold water using a mild detergent. Do not use bleach. Dry on low-heat setting. If you intend to iron the transferred area, ensure that the image is covered with parchment paper before ironing.
3G JET OPAQUE PRINTING INSTRUCTIONS:
1. Print image on coated side of paper right reading (do not mirror the image).
2. Trim away the unprinted areas of the transfer if desired.
PRE-TRANSFERRING INSTRUCTIONS:
1. Prepare the substrate by ensuring the surface is clean, dry, and wrinkle free by using a lint brush and your heat press.
TRANSFERRING INSTRUCTIONS:
1. Bend a corner to remove the backing paper from the printed image.
2. Place the Heat Transfer Paper on the top of the garment with the image facing up (right reading to you).
3. Completely cover the image with one sheet of parchment paper.
4. Press: 30 seconds at 350°F/177°C using medium pressure (30 to 45 psi/2 to 3 bar).
5. Once cold, peel away ironing sheet in a smooth even motion. WASHING INSTRUCTIONS: Turn garment inside out and wash in cold water using a mild detergent. Do not use bleach. Dry on low-heat setting. If you intend to iron the transferred area, ensure that the image is covered with parchment paper before ironing.
IMPORTANT: Printers and heat presses vary in accuracy. Neenah Paper has tested their products with numerous printers and presses with excellent results. Nonetheless, we recommend that you test the paper in your equipment to ensure the best results. Neenah’s maximum obligation shall be to replace any paper that has proven to be defective. Hand ironing instructions are published separately.
For more information about Neenah Paper Heat Transfer Papers: Neenah.com/Technical/HeatTransfer