FP09 Fuchsia (Pink) StripFlock Pro Sheet

You will earn up to 4 reward points after purchasing this product.

One 12in x 14.75in sheet of Siser StripFlock Pro in Color FP09 Fuchsia.  This color was previously called Pink. 

Only 100% genuine Siser HTV is used.  All sheets are +/- 0.25in

  • $4.50

Qty:  
In stock (94 items available)
OR
This product is a part of the following bundle(s):

StripFlock® Pro Heat Transfer Vinyl

The Only Flock in the Industry that can be Layered On Itself.

A great alternative to embroidery, StripFlock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep, opaque colors make StripFlock Pro excellent for retro designs or anytime you want a rich look. StripFlock Pro looks excellent on caps, bags, and garments that need textured visual interest. Use Stripflock Pro as a base layer and cover with other materials or more StripFlock Pro! The ability to layer this material allows you to say “yes” to multi-color designs.

Specifications: PVC Composition • Pressure sensitive backing • Suede-like finish • 500 Microns/19.6 Mils • 45°/60° blade • Can be layered

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm/cold
Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 311°F/155°C
• Use medium pressure for 15-20 seconds
• Peel carrier warm/cold
StripFlock Pro Applies to:100% cotton
Poly/cotton blends
100% polyester
Leather
Laundering:Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

Cricut:

Blade: Standard
Setting: Iron-On +

Silhouette Cameo:

Blade: Standard, 4
Material: Heat Transfer, Flocked
Speed: 5
Force: 6

Scan N Cut:

Blade: Standard, 4
Cut Speed: 1
Cut Pressure: 2

Roland GS/GX-24:

Blade: 45°
Gram Force: 80-120
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 10
Tool: CB09U+0
Speed: 30 cm/s

Titan Series:

Blade: 45°/60°
Gram Force: 100-110
Speed: 180mm/s
*Blade Advancing Varies

    • Product Size
      12in x 14.75in
    • Weight
      1.6 oz
    • SKU
      FP09-12x14.75