Brick 600 All Color Pack
This complete pack comes with all 12 colors of Siser Brick 600 (Update 2/12/2024)
Only 100% genuine Siser heat transfer vinyl is used. All sheets are +/- 0.25in on the length and width.
- 1 x BR01 White Brick 600 Sheet
- 1 x BR02 Black Brick 600 Sheet
- 1 x BR03 Royal Blue Brick 600 Sheet
- 1 x BR04 Navy Blue Brick 600 Sheet
- 1 x BR05 Red Brick 600 Sheet
- 1 x BR06 Yellow Brick 600 Sheet
- 1 x BR07 Green Brick 600 Sheet
- 1 x BR16 Fluorescent Yellow Brick 600 Sheet
- 1 x BR17 Fluorescent Orange Brick 600 Sheet
- 1 x BR18 Fluorescent Green Brick 600 Sheet
- 1 x BR19 Fluorescent Pink Brick 600 Sheet
- 1 x BR20 Fluorescent Blue Brick 600 Sheet
- 1 x Siser Brick 600 All Color Pack Inventory Control
Brick™ 600 Heat Transfer Vinyl
Our Thickest Heat Transfer Vinyl – Now Easier to Cut and Apply
Thin or thick, materials of all sizes have a place in garment decorating! Siser Brick 600 is a 600 micron thick, flexible heat transfer vinyl that’s designed for smaller logos and designs to add extra dimension to your garments. Brick 600’s matte finish looks great on caps, bags, and is ideal for left chest logos. Next time you feel your design is just too flat, consider giving it some dimension with Brick 600 by Siser!
Brick is CPSIA Certified, so it’s perfect for decorating children’s clothing and accessories.
Specifications: PU Composition • Pressure sensitive backing • Matte finish • 600 Microns/23.6 Mils • 45°/60° blade
| Cricut: • Blade: Standard • Setting: Cardstock Light + | Silhouette Cameo: • Blade: Standard, 10 • Setting: Heat Transfer Material (Flocked) • Speed: 4 • Thickness: 33 | Scan N Cut: • Blade: 10 • Cut Speed: 1 • Cut Pressure: 2 | Roland GS/GX-24: • Blade: 60° • Force: 150g-190g • Speed: 30 cm/s |
| Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier cold | Application Instructions (heat press) • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 311°F/155°C • Use medium/firm pressure for 20 seconds • Peel carrier cold |
| Brick 600 Applies to:• 100% cotton • Poly/cotton blends • 100% polyester | Laundering:• Wait 24 hours before first wash • Machine wash cold / mild detergent • Dry on low dryer setting • Do not dry clean |