Siser StripFlock Pro All Color Pack
Contains (25) 12in x 14.75in sheets, one of each currently manufactured color of Siser StripFlock Pro.
Only 100% genuine Siser HTV is used. All sheets are +/- 0.25in
- 1 x FP01 White StripFlock Pro Sheet
- 1 x FP02 Black StripFlock Pro Sheet
- 1 x FP03 Royal StripFlock Pro Sheet
- 1 x FP04 Navy StripFlock Pro Sheet
- 1 x FP05 Red StripFlock Pro Sheet
- 1 x FP06 Yellow StripFlock Pro Sheet
- 1 x FP07 Green StripFlock Pro Sheet
- 1 x FP08 Orange StripFlock Pro Sheet
- 1 x FP09 Fuchsia (Pink) StripFlock Pro Sheet
- 1 x FP10 Pale Blue StripFlock Pro Sheet
- 1 x FP11 Brown StripFlock Pro Sheet
- 1 x FP14 Burgundy StripFlock Pro Sheet
- 1 x FP15 Purple StripFlock Pro Sheet
- 1 x FP16 Fluorescent Yellow StripFlock Pro Sheet
- 1 x FP17 Fluorescent Orange StripFlock Pro Sheet
- 1 x FP18 Fluorescent Green StripFlock Pro Sheet
- 1 x FP19 Fluorescent Pink StripFlock Pro Sheet
- 1 x FP21 Lemon Yellow StripFlock Pro Sheet
- 1 x FP22 Gray StripFlock Pro Sheet
- 1 x FP27 Turquoise StripFlock Pro Sheet
- 1 x FP55 Bright Red StripFlock Pro Sheet
- 1 x FP65 Light Pink StripFlock Pro Sheet
- 1 x FP80 Anthracite StripFlock Pro Sheet
- 1 x FP84 Fluorescent Red StripFlock Pro Sheet
- 1 x FP89 Fresh Mint StripFlock Pro Sheet
- 1 x StripFlock Pro All Color Pack Inventory Control
StripFlock® Pro Heat Transfer Vinyl
The Only Flock in the Industry that can be Layered On Itself.
A great alternative to embroidery, StripFlock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep, opaque colors make StripFlock Pro excellent for retro designs or anytime you want a rich look. StripFlock Pro looks excellent on caps, bags, and garments that need textured visual interest. Use Stripflock Pro as a base layer and cover with other materials or more StripFlock Pro! The ability to layer this material allows you to say “yes” to multi-color designs.
Specifications: PVC Composition • Pressure sensitive backing • Suede-like finish • 500 Microns/19.6 Mils • 45°/60° blade • Can be layered
Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier warm/cold | Application Instructions (heat press) • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 311°F/155°C • Use medium pressure for 15-20 seconds • Peel carrier warm/cold |
StripFlock Pro Applies to:100% cotton Poly/cotton blends 100% polyester Leather | Laundering:Wait 24 hours before 1st wash Machine wash warm or cold / mild detergent Dry on normal dryer setting Do not dry clean |
Cricut: Blade: Standard | Silhouette Cameo: Blade: Standard, 4 | Scan N Cut: Blade: Standard, 4 |
Roland GS/GX-24: Blade: 45° | Graphtec: Blade: 45° | Titan Series: Blade: 45°/60° |